HomeLearnFundamentalsNatural Hydrogen Explained: Origin, Exploration, Purity

Natural Hydrogen Explained: Origin, Exploration, Purity

Engineering Insight: Natural hydrogen refers to molecular hydrogen (H2) generated naturally within the Earth’s crust through geochemical reactions, accumulating in underground reservoirs just like conventional natural gas.

For decades, the energy industry operated under the assumption that molecular hydrogen (H2) could not accumulate in commercial quantities within the Earth’s crust. Because hydrogen molecules are exceptionally small and light, standard geological wisdom held that H2 would rapidly escape through caprocks or be consumed by subsurface microbes. Recent drilling, serendipitous discoveries in old water wells, and dedicated exploration campaigns have upended this paradigm. Natural hydrogen—also known as white, gold, or geologic hydrogen—is now recognized as a potentially transformative primary energy resource.

For practising engineers, project developers, and technical buyers, understanding natural hydrogen requires bridging the gap between conventional petroleum geology and heavy-industry gas processing. Unlike green hydrogen generated via water electrolysis or grey hydrogen produced via steam methane reforming, geologic hydrogen is a primary energy source extracted directly from the ground. However, its exploration, extraction, and purification present unique engineering challenges involving high-pressure gas handling, corrosive companion gases, and strict safety standards.

Advertisement

The Origin and Generation Mechanisms of Natural Hydrogen

Subsurface hydrogen generation is driven by several distinct geochemical pathways operating at varying depths and temperatures within the lithosphere. Quantifying these mechanisms allows exploration teams to build predictive deposition models.

The most prolific mechanism is serpentinization. This exothermic oxidation-reduction reaction occurs when water interacts with iron-rich, ultramafic rocks such as peridotite, dunite, or pyroxenite at temperatures typically ranging from 200 °C to 350 °C under lithospheric pressures of 50 MPa to 200 MPa. In this reaction, ferrous iron (Fe2+) in the crystal lattice of minerals like olivine is oxidized to ferric iron (Fe3+), reducing the oxygen in water molecules (H2O) and releasing free molecular hydrogen. A simplified representation of this reaction is 3Fe2SiO4 + 2H2O to 2Fe3O4 + 3SiO2 + 2H2, generating substantial molar volumes of H2 per cubic metre of reacting rock.

A second major mechanism is radiolysis. Radioactive decay of uranium (U), thorium (Th), and potassium (K) isotopes present in crustal rocks emits alpha, beta, and gamma radiation. When this ionizing radiation passes through pore water, it radiolytically splits water molecules into hydrogen radicals and hydroxyl radicals, which subsequently recombine to form dissolved H2 and oxygen. While radiolysis rates per unit time are relatively low, operating over geological timescales of millions of years in granitic shields and crystalline basements yields substantial cumulative concentrations.

A third source is deep-seated or mantle degassing. Primordial hydrogen trapped during planetary accretion, or hydrogen generated deep within the Earth’s mantle, migrates upward along deep crustal faults, rift zones, and mid-ocean ridges. Finally, thermogenic breakdown of deep organic matter at elevated temperatures (exceeding 150 °C) in sedimentary basins can also liberate free hydrogen, though these deposits often suffer from rapid microbial consumption unless sealed effectively.

Exploration Methods and subsurface migration

Exploring for natural hydrogen borrows heavily from traditional oil and gas methodology, yet requires distinct adaptations due to the extreme mobility and low molecular weight of the H2 molecule. While a conventional seismic survey can map structural traps, anticlines, and faults, it cannot directly image hydrogen gas accumulation.

Successful exploration campaigns rely on a multi-tiered approach:

  • Geological and Tectonic Screening: Identifying ancient shields, cratons, ophiolite belts, and continental rift systems where serpentinization or deep faulting is historically active.
  • Soil Gas Geochemistry: Deploying surface probes to measure molecular hydrogen concentrations in the soil gas matrix at depths of 1.0 m to 2.0 m. Background atmospheric hydrogen is approximately 0.5 ppmv by volume; soil gas anomalies exceeding 10 ppmv to several thousand ppmv often indicate underlying migration pathways.
  • Magnetotelluric (MT) Surveys: Mapping subsurface electrical resistivity. Serpentinized zones and fluid-saturated fracture networks exhibit distinct low resistivity anomalies compared to dry, crystalline basement rock.
  • Exploration Drilling and Mud Logging: Installing specialized mass spectrometers and thermal conductivity detectors on drilling rigs to continuously monitor mud return gases for H2, helium, methane, and carbon dioxide.
Property / ParameterNatural Hydrogen (H2)Natural Gas (Methane, CH4)
Density (at 0 °C, 101.325 kPa)0.0899 kg/m30.717 kg/m3
Dynamic Viscosity (at 20 °C, 101.325 kPa)8.9 × 10-6 Pa·s11.0 × 10-6 Pa·s
Lower Heating Value (LHV)120.0 MJ/kg (approx. 10.8 MJ/Nm3)50.0 MJ/kg (approx. 35.8 MJ/Nm3)
Molecular Weight2.016 g/mol16.04 g/mol

Because hydrogen molecules are extremely small, standard elastomeric seals, carbon steel pipe walls, and conventional cement sheaths in wellbores face severe challenges regarding diffusion and embrittlement. Subsurface migration is heavily influenced by buoyancy forces; given its ultra-low density of 0.0899 kg/m3 at standard temperature and pressure (STP), H2 migrates upward rapidly unless trapped beneath impermeable, ductile caprocks such as thick, unfractured evaporites (halite or anhydrite) or dense clay-rich shales.

Purity, Associated Gases, and Downhole Contaminants

Raw natural hydrogen extracted from a wellhead is rarely pure. Unlike industrial-grade green hydrogen produced via electrolysis which typically exceeds 99.9% purity prior to drying, geologic hydrogen is co-produced with a cocktail of carrier and trace gases. Understanding the composition of the raw stream dictates the design of the surface processing and purification facility.

Field data from various global exploration wells indicate that raw gas streams frequently exhibit wide compositional variations:

  • Hydrogen (H2): Varies from 10 percent to over 95 percent by volume.
  • Nitrogen (N2): Often the primary balance gas, ranging from 2 percent to 80 percent by volume.
  • Methane (CH4) and Higher Hydrocarbons: Ranging from trace levels to 40 percent by volume.
  • Carbon Dioxide (CO2): Ranging from trace levels to 15 percent by volume.
  • Hydrogen Sulfide (H2S): Present in minor concentrations (from 0 ppmv to 5,000 ppmv), requiring stringent sour-gas handling procedures.
  • Noble Gases: Helium (He) and Argon (Ar) are frequently present, with helium sometimes existing in economically recoverable concentrations exceeding 0.5 percent by volume.

The presence of H2S and moisture (water vapor saturated at reservoir temperature and pressure) means that raw natural hydrogen is aggressively corrosive. Combined with the high diffusivity of hydrogen gas, this necessitates careful material selection for well casings, valves, and piping.

Worked Calculation: Gas Reserve Estimation and Surface Flow Rate

To evaluate the economic viability of a natural hydrogen discovery, reservoir engineers apply volumetric reserve estimation methods analogous to those used in conventional natural gas fields, adjusted for the specific compressibility factor (Z) of hydrogen.

Consider an isotropic, confined underground reservoir discovered at a depth of 1,500 m. The engineering parameters measured during wireline logging and well testing are as follows:

  • Reservoir Area (A) = 5.0 km2 = 5,000,000 m2
  • Net Pay Thickness (h) = 30 m
  • Average Porosity (φ) = 0.12 (12 percent)
  • Initial Water Saturation (Sw) = 0.25 (25 percent)
  • Reservoir Temperature (T) = 65 °C = 338.15 K
  • Reservoir Pressure (P) = 15.0 MPa = 15,000 kPa
  • Hydrogen Compressibility Factor (Z) at 65 °C and 15.0 MPa = 1.045 (derived from real gas law charts for H2)
  • Surface Standard Pressure (Psc) = 101.325 kPa
  • Surface Standard Temperature (Tsc) = 15 °C = 288.15 K

Step 1: Calculate the Bulk Volume of the Reservoir (Vb)

Vb = A × h

Vb = 5,000,000 m2 × 30 m = 150,000,000 m3

Step 2: Calculate the Pore Volume (Vp) containing Gas

Vp = Vb × φ × (1 – Sw)

Vp = 150,000,000 m3 × 0.12 × (1 – 0.25) = 150,000,000 × 0.12 × 0.75 = 13,500,000 m3

Step 3: Calculate Initial Gas in Place (IGIP) at Reservoir Conditions, then convert to Standard Cubic Metres (Nm3) using the Real Gas Law

IGIP (Nm3) = Vp × (P / Z) × (Tsc / Psc) × (1 / T)

IGIP (Nm3) = 13,500,000 × (15,000 / 1.045) × (288.15 / 101.325) × (1 / 338.15)

IGIP (Nm3) = 13,500,000 × 14,354.07 × 2.8438 × 0.002957 = 1,625,450,000 Nm3

Thus, the initial geologic hydrogen in place is approximately 1.625 billion standard cubic metres. Assuming a realistic recovery factor (RF) of 0.60 based on pressure depletion drive mechanisms, the recoverable natural hydrogen reserve is approximately 975,000,000 Nm3.

Checklist for Engineers

When designing surface facilities, compression spreads, or purification trains for natural hydrogen projects, verify the following engineering parameters:

  • Material Selection: Ensure all wetted metallic components in piping, valves, and vessel internals comply with ISO 11114-1 regarding compatibility of metallic materials with hydrogen gas, utilizing austenitic stainless steels (such as 316L) or specialized low-alloy steels with hardness limits to prevent hydrogen embrittlement.
  • Elastomer Ratings: Replace standard NBR (nitrile rubber) or EPDM seals with hydrogen-rated HNBR, fluoroelastomers (FKM), or polytetrafluoroethylene (PTFE) to minimize gas permeation and explosive decompression damage during rapid depressurization.
  • Purification Train Design: Integrate Pressure Swing Adsorption (PSA) units or membrane separation cascades capable of handling variable nitrogen (N2) and methane (CH4) feed concentrations to reach pipeline-grade or fuel-cell-grade purity (typically exceeding 99.97 percent H2 per ISO 14687).
  • Compressor Specification: Select reciprocating or ionic liquid compressors designed specifically for ultra-low molecular weight gases, ensuring zero-leakage packing glands and explosion-proof electrical classification (Class I, Division 1 or ATEX Zone 1).
  • Safety and Venting: Design high-integrity pressure relief systems in accordance with API 520 Part I and API 521, accounting for the exceptionally high burning velocity, wide flammability limits (4 percent to 75 percent in air), and invisible flame of molecular hydrogen.

Frequently Asked Questions

Is natural hydrogen renewable or fossil-based?

Natural hydrogen is considered a primary energy resource that is continuously generated within the Earth through ongoing geochemical processes like serpentinization and radiolysis. Depending on the local generation rate versus extraction rate, some subsurface accumulations act as renewable resources operating on geological timescales, whereas others represent finite non-renewable reservoirs.

How does the cost of natural hydrogen compare to green hydrogen?

Because natural hydrogen bypasses the capital and electrical power expenditures required for water electrolysis, techno-economic assessments indicate that extracted geologic hydrogen could potentially be produced at a significantly lower levelized cost per kilogram compared to green or blue hydrogen, provided reservoir productivity and well flow rates remain high.

What are the primary technical risks in natural hydrogen extraction?

The primary engineering risks include low wellhead pressure, high nitrogen dilution requiring expensive separation units, aggressive hydrogen embrittlement of drilling and production tubulars, and subsurface microbial activity that can consume H2 if sulfate-reducing bacteria are present in the reservoir water.

Can existing natural gas pipelines transport natural hydrogen?

Existing carbon-steel natural gas transmission pipelines can transport natural hydrogen only after rigorous engineering assessment. Due to hydrogen embrittlement, diffusion losses, and lower volumetric energy density requiring higher compressor power, blending limits are typically restricted to 5 percent to 20 percent by volume unless pipelines are lined or retrofitted with specialized composite materials.

If you are evaluating natural hydrogen reserves, specifying balance-of-plant compression systems, or designing gas purification skids for complex subsurface fluid streams, contact Avoltium to discuss your engineering requirements.

spot_img

latest articles

explore more